Sika AnchorFix-3001 is a two component, pure epoxy anchoring adhesive
Sika AnchorFix-3001 is a two component, pure epoxy anchoring adhesive. Using high quality, VOC- and styrene-free technology, Sika AnchorFix 3001 has been specifically design to provide a high-strength, user-friendly and versatile adhesive for use in dry, wet or flooded conditions and on or into numerous base materials. The anchoring adhesive is suitable for medium and heavy loads in both structural and non-structural applications.
It can be used in the anchoring of rebar or threaded rods in solid concrete, masonry, brick, block and stone. Grouting horizontally, vertically and overhead (refer to Limitations), where slow-settingallows extended working time. Suitable for deeper and scattered holes or applications where a fast turnaround is not needed.Suitable for use as a ‘pick-proof’ sealant in secure or holding suites and similar facilities. Grouting in external environments and where applications are subject to dynamic loads and vibrations.
- Supplied as 1:1 ratio in side by side cartridges
- Styrene- and VOC- free
- Versatile material allows application as adhesive and anchoring gel
- Sets up in dry, wet or flooded conditions
- Cures down to 0°C (32°F) when material is conditioned to 5°C (41°F)
- Cures without exhibiting expansion pressures
- Extended open and gel times accommodate anchoring in deep and scattered holes
- Permits anchors close to free edges
- Suitable for chemical anchors, threaded bars and reinforcing steel.
- Performs in both cracked and non-cracked concrete.
This product can expose you to chemicals including Quartz (SiO2), which are known to the State of California to cause Cancer & Reproductive Harm.
